BEA’s LZR®-I30 is a LASER-based Time-of-Flight sensor. This high precision technology ensures accurate object detection. The product configuration provides four LASER-based curtains offering a three dimensional safety zone.
The sensor is designed for the detection of people and vehicles, in both indoor and outdoor environments. Its detection accuracy makes this sensor ideal for high performance industrial doors, vehicle flow safety, perimeter protection and variety of applications.
The LZR-I30 is housed in an IP65 rated enclosure and can be installed in outdoor, industrial and other harsh environments. Three visible LED spots provide accurate reference points when adjusting the tilt angle. Parameter adjustments can be made with a BEA universal remote control.
Four curtains of detection each capable of 360 in × 360 in (30 ft × 30 ft)
Detects objects as small as 2 inches at 30 feet away, depending on application
Has the ability to ignore dynamic ground conditions and extreme weather
Three visible LEDs for pattern alignment
Technology |
LASER scanner, Time-of-Flight measurement |
|
---|---|---|
Detection Mode |
Motion / Presence (EN 12453 Typ. E) |
|
Max. Detection Range |
30’ × 30’ |
|
Remission Factor |
> 2% |
|
Emission Characteristics |
|
|
Supply Voltage |
10 – 35 VDC @ Sensor Terminal (to be operated from SELV compatible power supplies only) |
|
Peak Current at Power-On |
1.8 A (Max. 80 ms @ 35 V) |
|
Power Consumption |
< 5 W |
|
Response Time |
Typ. 20 ms; max. 80 ms (+ output activation delay) |
|
Output |
2 electronic relays (galvanic isolated – polarity free) |
|
LED-Signal |
1 Blue LED: Power-on |
|
Dimensions |
|
|
Cable Length |
30’ |
|
Material |
PC / ASA |
|
Color |
Black |
|
Rotation Angle on Bracket |
±5° (Lockable) |
|
Tilt Angle on Bracket |
±3° |
|
Degree of Protection |
IP65 |
|
Temperature Range |
-22 – 140 °F if powered |
|
Humidity |
0 – 95% non-condensing |
|
Vibrations |
< 2 G |
|
Pollution on Front Screens |
Max. 30% ; Homogenous |
|
Test Body Dimensions |
700 mm × 200 mm × 200 mm |
|
Norm Conformity |
2006 / 95 / EC: LVD; 2002 / 95 / EC: RoHS; 2004 / 108 / |
LZR-i30
LZR Bracket Accessory
BEA Universal Remote Control
Universal industrial mounting bracket
Universal industrial mounting bracket
Power supply solutions to meet the needs of most applications.
Why is the LZR-I30 not working and the blue light is on?
The monitoring wires must be paralleled with the power wires.
Why is the remote control not working with the LZR-I30?
The LZR-I30 locks out the remote control after 30 minutes of idle time. You must cycle the power to access the remote control feature again.
Where is the LZR-I30 pattern oriented?
Press UNLOCK > MAGIC WAND > MAGIC WAND. Three visible laser beams will appear to align the sensor.
Can the LZR-I30 be powered with a BEA 24VAC transformer?
No, the LZR-I30 can only be powered with DC voltage.
Can the LZR-I30 be set to prevent false detections when it rains?
Yes. To achieve this, increase the Immunity Filter, Minimum Object Size, and Output Activation Delay.
Can I use the LZR-I30 in a freezer?
Yes, as long as there is not a lot of moisture or fog present. The lens must be clear for proper operation.
Will water on the floor cause issues?
No. The LZR-I30 has an uncovered zone 4 inches above the floor and can be increased up to 8 inches.
Why is the LZR-I30 flashing orange and stuck in detection?
The LZR-I30 was set up with a reference point. You must re-learn or set up again without a reference point.
Why will the LZR-I30 not power up, even with DC voltage?
The LZR-I30 can draw up to 1.8 amps for a very short time during start up. Ensure that the power supply can withstand the in-rush current.
Can I use the LZR-I30 for a horizontal application?
Yes. Utilize the visible red spots to help orient the detection zone.